APC BE800-IND 800VA BACK-UPS

Back-UPS Features & Benefits

Protection

• Battery and surge protected outlets
  Back up and protect your hardware and data during power outages, surges and spikes.
• Surge only outlets
  Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Marketing Features

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

Serviceability

• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.

Manageability

• LED status display
  Quickly understand unit and power status with visual indicators.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions

Output

• Efficiency at Full Load
  95.0 %
• Output Frequency (sync to mains)
  47 - 63 Hz
• Output Frequency (not synced)
  50Hz +/- 0.1% for 50Hz nominal
• Output Connections
  (3) India 3-pin 6A (Battery Backup)

  (1) India 3-pin 6A (selector_surgetitle)
• Max Configurable Power (Watts)
  480 Watts / 800 VA
• Output power capacity
  480 Watts / 800 VA
• Topology
  Line Interactive
• Waveform type
  Stepped approximation to a sinewave

Input

• Number of Power Cords
  1
• Efficiency at Full Load
  95.0 %
• Input frequency
  50 Hz +/- 3 Hz
• Input Breaker Capacity
  0 A
• Input Connections
  India 3-pin 6A

Battery

• Typical recharge time
  8 hour(s)
• Battery type
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Battery Volt-Amp-Hour Capacity
  135
• Runtime
  View Runtime Graph
  View Runtime Chart

Communication

• Audible Alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Control panel
  LED status display with On Line : On Battery : Replace Battery and Building Wiring Fault

Runtime

• Output power capacity
  480 Watts / 800 VA

Surge

• Filtering
  Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

• Maximum Depth
  290 mm , 29.0 CM
• Maximum Height
  130 mm , 13.0 CM
• Net Weight
  9.0 KG
• Shipping Depth
  410 mm , 41.0 CM
• Shipping Height
  170 mm , 17.0 CM
• Shipping weight
  10.0 KG
• Shipping Width
  270 mm , 27.0 CM
• Maximum Width
  220 mm , 22.0 CM

Environmental

• Audible noise at 1 meter from surface of unit
  45.0 dBA
• Operating Temperature
  0 - 40 °C
• Operating Elevation
  0-3000 meters
• Operating Relative Humidity
  0 - 95 %
• Storage Temperature
  0 - 45 °C
• Storage Elevation
  0-9000 meters
• Storage Relative Humidity
  0 - 95 %
• Online thermal dissipation
  42.68 BTU/hr

Conformance

• Standard warranty
  2 years repair or replace